1 Gang Socket & Light Switch Spacer | Back Box Extender, 10/15/20mm

Fitting a light switch or single socket over acoustic panels, slatted timber, tiles or fresh plasterboard? Once the wall gains depth the back box sits too far back, and the faceplate no longer pulls up square. This 1-gang spacer brings the faceplate forward so it sits flush and level, with no wall alterations and no rewiring: isolate the circuit, unscrew the faceplate, sit the spacer behind it and refit.

Recessed on one side only

Most spacers are recessed on both faces. Ours is recessed on one side, so it can be turned round to let the switch body sit proud. That matters if you are fitting a switch with a clip-on cover, which will not seat properly against a double-recessed spacer.

Which depth do I need?

• 10mm: tiles, thin panelling, and back boxes that are only slightly recessed
• 15mm: most acoustic slat panels, and 12.5mm plasterboard over battens
• 20mm: thick acoustic panels, boarded and battened walls, and deeper smart switch modules that need clearance

Specification

• Fits standard UK 1-gang faceplates and back boxes: 86 x 86mm, 5mm corner radius
• Screw hole spacing: 59mm centre to centre
• Made from ABS for impact resistance and heat tolerance
• White, black or grey, with optional 40mm or 75mm mounting screws (silver for white, black for black and grey)
• Dispatched from the UK on Royal Mail tracked

Need the wider plate? See the 2-gang socket spacer, or read the sizing and fitting guide.

Dispatched from the UK, usually within 48 hours, via Royal Mail with tracked and express options at checkout. If something is not right, contact us to arrange a return.

Shipping policy · Refund policy